3MM BLUE LEDS – KSH 5 at HIMASTORES Mombasa – best electronics in Kenya
Home / Displays / 3MM BLUE LEDS

3MM BLUE LEDS

SKU: HMJ113 Category: Displays
KSH 5.00
In Stock

Product Description

3mm Blue LEDs

Standard T1 ThroughHole Emitting Diodes for Electronics Projects

3mm blue LEDs are compact, throughhole components used as visual indicators in Arduino, Raspberry Pi, and other DIY electronics projects. Packaged in a standard 3mm (T1) round form, they fit easily into breadboards and PCBs.

Compact 3mm Size - Ideal for fitting into tight spaces and small designs
Clear Visual Indicator - Bright blue light for status indication and display projects
Blue LEDs have a higher forward voltage than red/green (typically 3.03.6V). Always use a currentlimiting resistor (220Ω470Ω) to avoid exceeding the 20mA30mA max current.
The longer lead is the Anode (+), the shorter lead is the Cathode (-).
Do not exceed the maximum forward current of 20mA-30mA to prevent damage.

Technical Specifications (Typical Values)

ParameterValue
Package Type3mm (T-1) Round
Mounting TypeThrough Hole
Pin Spacing2.54mm
Forward Voltage (Typical)3.0V - 4.5V
Forward Current (Max)20mA - 30mA
Dominant Wavelength450nm - 470nm
Lens TypesClear / Diffused / Blue Tinted

Note: Specifications vary by manufacturer - always check the datasheet for your specific model.

Key Features

+High Brightness Options - Available from 40mcd to 5000mcd, including super bright variants

+Durable & Long Life Solidstate reliability with low power consumption

+Multiple Lens Options Clear for focused light, diffused for wideangle illumination

= Applications =

  1. Status indicators for electronics and microcontrollers
  2. Backlighting for small displays
  3. Decorative and accent lighting
  4. General prototyping and DIY projects
Reliable and Widely Used - A standard LED format with consistent performance
Easy Integration - Works with all microcontrollers and development boards

√ Available in packs of 10, 100, and 500+

√ Compatible with standard 3mm LED holders and bezels

√ Low power consumption for battery-powered projects

Troubleshooting

LED not lighting:

  • Check polarity: anode (long lead) to positive, cathode (short lead) to ground
  • Verify current-limiting resistor is installed
  • Ensure voltage supply meets forward voltage requirement

Dim or uneven brightness:

  • Confirm correct current limiting resistor value
  • Check for loose connections