MH-SR602 MINI Motion Sensor Detector Module SR602 Pyroelectric Infrared PIR kit sensory switch for Arduino Diy With lens – KSH 300 at HIMASTORES Mombasa – best electronics in Kenya
Home / Sensors / MH-SR602 MINI Motion Sensor Detector Module SR602 Pyroelectric Infrared PIR kit sensory switch for Arduino Diy With lens

MH-SR602 MINI Motion Sensor Detector Module SR602 Pyroelectric Infrared PIR kit sensory switch for Arduino Diy With lens

SKU: HMJ730 Category: Sensors
KSH 300.00
Out of Stock

Product Description

MH-SR602 Mini PIR Motion Sensor Detector Module

Ultra-Compact Pyroelectric Infrared Sensor for Arduino and DIY Projects

The MHSR602 is an ultracompact, lowpower PIR (Pyroelectric Infrared) motion sensor module designed to detect human body movement within a range of up to 5 meters. Its tiny 15x15mm footprint and 20µA quiescent current make it ideal for batterypowered and space-constrained projects like smart lighting, security alarms, and automatic door systems, working seamlessly with Arduino and other microcontrollers [citation:1][citation:2][citation:13].

UltraLow Power Consumption (20µA) Ideal for batterypowered applications and energysaving devices.
Wide Operating Voltage - Accepts any voltage from 3.3V to 15V DC, compatible with 5V and 3.3V logic [citation:2][citation:6].
The module's output is a simple TTL digital signal: HIGH (3.3V) when motion is detected, and LOW (0V) when no movement is present [citation:2][citation:4].
No library is required to use this sensor with Arduino, making it very straightforward to implement [citation:6].
Do not expose the module to direct sunlight, heat sources, or air vents, as this can cause false triggers due to its high sensitivity [citation:9].

Technical Specifications

ParameterValue
ModelSR602
Supply Voltage3.3V to 15V DC
Quiescent Current20µA
Output LogicHigh: 3.3V / Low: 0V
Detection RangeUp to 5 meters (recommended 0-3.5m)
Detection Angle100°
Output Delay TimeFactory set to 2.5 seconds (adjustable) [citation:1][citation:2]

## Key Features

+High Sensitivity, Fast Response Reliable motion detection with a compact, easyto-install design.

+Adjustable Delay The highlevel output time can be modified from 2.5 seconds to 1 hour by changing a chip resistor, allowing for long-duration triggers [citation:1][citation:8].

+Repeatable Trigger - The timer resets with each new detection, ensuring devices stay active as long as motion is present [citation:6][citation:8].

+Photosensitive Option - The module has a footprint for adding a photodiode, allowing it to be configured to operate only at night [citation:6][citation:9].

# Applications

  1. Body Sensor Lights and smart lighting systems [citation:1][citation:6].
  2. Security Alarms and intruder detection systems [citation:6][citation:8].
  3. Access Control and on-demand imaging systems [citation:9].
  4. Batterypowered and portable devices due to its ultralow power consumption [citation:6].
A top choice for battery-powered projects where space and power are at a premium.
Excellent lowpower alternative to larger PIR sensors like the HCSR501.

## Connection Guide

PinDescription
+ (VCC)Power supply (3.3V to 15V DC)
- (GND)Circuit Ground (0V)
OUTDigital Signal Output (3.3V / 0V)

> This module is exceptional for battery-powered projects due to its 20µA quiescent current, which is significantly lower than other common PIR sensors [citation:6].

## Troubleshooting

False triggers or inconsistent readings:

  • Avoid direct sunlight, heat sources, and air vents, as the sensor is highly sensitive to temperature changes.
  • Ensure a stable power supply, as voltage ripples can cause false triggers [citation:10].
  • If the module powers on and outputs HIGH for a short time, this is normal behavior during its startup sequence [citation:8][citation:9].