Ultrasonic Atomization Maker 20mm 113KHz Mist Atomizer DIY Humidifier with PCB DC3-12V Mini USB Humidifier Module – KSH 800 at HIMASTORES Mombasa – best electronics in Kenya
Home / HIMA electronics / Ultrasonic Atomization Maker 20mm 113KHz Mist Atomizer DIY Humidifier with PCB DC3-12V Mini USB Humidifier Module

Ultrasonic Atomization Maker 20mm 113KHz Mist Atomizer DIY Humidifier with PCB DC3-12V Mini USB Humidifier Module

SKU: HMJ673 Category: HIMA electronics
KSH 800.00
Out of Stock

Product Description

Ultrasonic Atomization Maker 20mm 113KHz Mist Atomizer

Complete DIY Humidifier Module with Driver PCB

The Ultrasonic Atomization Maker is a compact, highfrequency mist generator featuring a 20mm ceramic atomizer plate and 113KHz operating frequency. This complete module includes the driver PCB and operates on DC 312V, making it perfect for DIY humidifiers, aroma diffusers, and creative mist projects with Arduino and USB power.

Complete kit includes atomizer plate + driver PCB ready to use
Requires water depth adjustment - plate must be near surface, not fully submerged [citation:4]
Do not operate dry - atomizer will overheat and fail

Technical Specifications

ParameterValue
Atomizer Diameter20mm
Operating Frequency113KHz
Supply VoltageDC 3.7V - 12V
Power Consumption~1.5W - 2.5W [citation:4]
Mist OutputFine particles (2-5µm) [citation:2]
PCB MaterialFR-4 (green epoxy)
Input CableUSB or bare wire
Dimensions (PCB)~15 x 11 x 2cm [citation:3]
OperationPush-button start [citation:1]

= Key Features =

Complete Module - Atomizer plate + driver PCB included

Wide Voltage Range - 3.7V to 12V for battery or USB power [citation:2]

High Frequency 113KHz produces ultrafine mist particles

Compact Size - 20mm atomizer fits small projects

Low Power ~1.5W for energyefficient operation [citation:4]

Easy to Use Simple pushbutton operation [citation:1]

Versatile - Works with water, sponge, or towel [citation:3]

= Applications =

  • DIY ultrasonic humidifiers
  • Aroma diffusers and essential oil atomizers
  • Terrarium and greenhouse misting
  • Desktop and mini USB humidifiers
  • Arts and special effects fog
  • Plant propagation and hydroponics
  • Medical and cosmetic spray applications

Wiring Guide

WireConnectionDescription
Red / VCC3.7-12V +Positive power input
Black / GNDGNDGround connection
Push ButtonOn PCBPress to activate misting

> Connect to any 3.7V12V DC power source battery, USB, or adapter

For USB power (5V) works perfectly with included cable
Do not exceed 12V - will damage the driver board

Quick Setup Guide

  1. Connect power (3.7-12V DC) to VCC and GND
  2. Place atomizer plate on water surface (not submerged)
  3. Press button on PCB to start
  4. Adjust water depth for optimal mist output
  5. Fine mist will begin immediately
For best results, ensure atomizer is floating on water surface
Use absorbent sponge or towel for continuous wicking [citation:3]
Atomizer must be at water surface - fully submerged prevents operation [citation:4]

Important Usage Tips

  • Water Level: Atomizer works best when plate is at water surface [citation:4]
  • Submersion: Do not fully submerge - completely underwater stops misting
  • Mounting: Need chassis to hold atomizer level with water surface [citation:4]
  • Cable Length: Wires may be short - extend carefully
  • Dry Operation: Never operate without water - will damage atomizer
For DIY projects, design holder to keep atomizer parallel to water surface [citation:4]
The atomizer vibrates at 113KHz to create fine water particles

Why Choose This Atomizer?

Complete plugandplay module with PCB
Wide voltage range for any power source
High-frequency 113KHz for fine mist
Cost-effective DIY solution
Versatile for multiple applications

√ Ready to use - no additional components required

√ Works with USB power banks (5V)

√ Easy push-button operation

√ Suitable for water, essential oils, and aroma

√ Compact 20mm size

√ Low power for battery projects

Safety Precautions

Never operate without water
Do not fully submerge atomizer
Keep away from children
Avoid contact with atomizer during operation (high frequency)
Use distilled water for longer atomizer life
Clean atomizer plate regularly to prevent mineral buildup
Mineral deposits reduce performance - clean with vinegar periodically
For essential oils, dilute properly to prevent clogging

The Ultrasonic Atomization Maker provides everything you need for DIY mist projects. Complete with PCB driver and 20mm atomizer, this module delivers fine mist for humidifiers, diffusers, and creative applications at an affordable price.

ULTRASONICATOMIZER MISTMAKER 20MMATOMIZER 113KHZ DIYHUMIDIFIER USBHUMIDIFIER ARDUINO MISTGENERATOR ATOMIZATION ESSENTIALOILDIFFUSER #DIYPROJECT New Best Seller Ultrasonic Atomizer