DC DC 0.9V-5V to 5V 600MA Power Bank Charger Step Up Boost Converter Supply Voltage Module USB Output Charging Circuit Board
KSH 200.00
In Stock
The DCDC 0.9V5V to 5V 600mA StepUp Boost Converter Module is a highefficiency power supply solution designed to convert low input voltages into a stable 5V output for USBpowered devices[citation:1][citation:7][citation:10]. Ideal for DIY power banks, mobile chargers, and portable electronics, this compact module allows you to power 5V devices from single or double AA batteries, lithium cells, or other lowvoltage sources[citation:7][citation:10].
| Parameter | Value |
|---|---|
| Input Voltage | 0.9V - 5V DC |
| Output Voltage | 5V DC |
| Output Current | 500 - 600mA |
| Conversion Efficiency | Up to 96%[citation:7] |
| Switching Frequency | 500KHz[citation:10] |
| Load Regulation | ±1%[citation:10] |
| Voltage Regulation | ±0.5%[citation:10] |
| Operating Temperature | -40°C to +85°C[citation:7] |
| PCB Size | 35mm x 16mm[citation:7] |
| Interface | USB Female Port |
| LED Indicator | Working status LED |
= Key Features =
UltraLow Start Voltage Operates from as low as 0.9V, maximizing battery usage[citation:10]
High Efficiency - Up to 96% conversion efficiency for optimal power transfer[citation:7]
USB Output - Standard USB female port for direct connection to devices[citation:7]
Compact Size - Small 35x16mm form factor fits in tight spaces[citation:7]
LED Indicator - Shows module working status[citation:7]
Wide Temperature Range Industrialgrade -40°C to +85°C operation[citation:7]
| Connection | Description |
|---|---|
| IN+ | Positive input (0.9-5V DC) |
| IN- | Ground |
| USB OUT | 5V output to USB devices |
> Input can be from single AA battery (0.91.5V) or two AA batteries (2.43V)[citation:7]
# Output Current by Input Source[citation:7][citation:10]
√ Works with nearly any battery type
√ Direct USB output for charging devices
√ Perfect for travel power bank projects
√ LED working indicator
√ Ready to use out of the box
√ Reliable and proven PFM control[citation:7]
The DCDC 0.9V5V to 5V 600mA StepUp Boost Converter is the perfect solution for powering USB devices from batteries. Ideal for DIY power banks, portable chargers, and any project requiring 5V from lowvoltage sources.
BOOSTCONVERTER STEPUP DCDC 5V USBCHARGER POWERBANK DIY ARDUINO BATTERYCHARGER ELECTRONICS POWERSUPPLY BOARD New Best Seller Boost Converter
![Pure sine wave inverter driven plate EGS002 "EG8010 + IR2110 driver module – KSH 1,000 at HIMASTORES Mombasa – best electronics in Kenya](/uploads/07.07.2026_10.20.06_REC.png "Buy Pure sine wave inverter driven plate EGS002 "EG8010 + IR2110 driver module for KSH 1,000 – HIMASTORES Mombasa – Quality electronics in Mombasa, Kenya")
