Soldering Iron Tip Refresher Non-stick Tin Solder Cream Clean Paste Oxide Head Resurrection Paste Enhances Welding Efficiency – KSH 450 at HIMASTORES Mombasa – best electronics in Kenya
Home / HIMA electronics / Soldering Iron Tip Refresher Non-stick Tin Solder Cream Clean Paste Oxide Head Resurrection Paste Enhances Welding Efficiency

Soldering Iron Tip Refresher Non-stick Tin Solder Cream Clean Paste Oxide Head Resurrection Paste Enhances Welding Efficiency

SKU: HMJ594 Category: HIMA electronics
KSH 450.00
Out of Stock

Product Description

Soldering Iron Tip Refresher Resurrection Paste

Non-Stick Tin Solder Cleaning Cream for Tip Restoration

This tip refresher paste is specially formulated to clean and restore oxidized soldering iron tips, enhancing welding efficiency and extending tip life. The nonstick formula removes stubborn oxides and retins surfaces quickly.

Instant Tip Revival Restores oxidized tips to likenew condition
Boosts Heat Transfer - Clean tips transfer heat efficiently
Apply tip refresher while iron is hot at 250°C to 350°C
Use regularly to prevent permanent tip oxidation damage
Avoid contact with skin - contains active cleaning agents

Technical Specifications

ParameterValue
TypeTip cleaning and tinning paste
Active IngredientsAmmonium chloride + flux activators
Working Temperature200°C to 400°C
ApplicationHot tip immersion and wipe
ColorWhite cream (turns clear when active)
PackagingAirtight container or syringe
Shelf Life24 months (sealed)

= Key Features =

Fast Oxide Removal Cleans within 23 seconds

Tinning Action - Leaves fresh solder coating

NonAcidic Formula Safe for delicate tip plating

Smoke Reduction - Low fume emission

Universal Use - Works on all iron tip types

= Applications =

  1. Daily iron tip maintenance
  2. Restoring old/ignored soldering tips
  3. Preparing tips for precise SMD work
  4. Preventing oxidation during storage
  5. Professional soldering stations
  6. Re-tinning after heavy use
Technicians' Secret - Used by repair professionals daily
Cost Effective - Extends tip life by 300%+

√ Ready for immediate hot application

√ Suitable for lead-free and leaded soldering

√ Non-damaging to nickel and iron plating

Usage Guide

Proper application method:

  1. Heat iron to operating temperature (300°C)
  2. Dip hot tip into paste for 2-3 seconds
  3. Wipe excess on damp sponge or brass wool
  4. Apply fresh solder to coat tip surface
  5. Repeat if oxide persists
  6. Use daily or when tip dulls
Keep container sealed when not in use
Apply to both sides of tip for complete coverage

Safety & Handling

Use in Ventilated Area - Fumes can irritate airways

Wear Safety Glasses - Prevents splatter contact

Keep Away from Children - Contains active chemicals

Wash Hands After Use - Avoid accidental ingestion

Never dip cold iron into paste - requires minimum 200°C
Do not overheat paste above 400°C - harmful gases form
Avoid getting paste on PCB or components

Troubleshooting

Tip still not tinning:

  • Increase temperature to 350°C
  • Scrub with brass wool first
  • Avoid using on severely pitted tips

Excessive splattering:

  • Pre-heat tip before dipping
  • Remove moisture from paste
  • Avoid dipping too aggressively
95%+ oxide removal rate on first application
Free tip care guide included

Ordering Information

PackageQuantityApplicationStock
20g Jar20gBulk useIn Stock
10g Syringe10gPreciseIn Stock
50g Jar50gPro/WorkshopAvailable

Bulk Professional Packs available

Fast Shipping on all orders

√ 100% quality tested

√ Contains full instruction leaflet

√ Safe for all mainstream iron brands

Tip CareCleaning PasteBest Seller
TinningRestorationProfessional