WS2812B RGB LED Flexible 8x8 Pixel Panel Strip Matrix Screen WS2812 Module Individually Addressable IC DC5V – KSH 600 at HIMASTORES Mombasa – best electronics in Kenya
Home / Displays / WS2812B RGB LED Flexible 8x8 Pixel Panel Strip Matrix Screen WS2812 Module Individually Addressable IC DC5V

WS2812B RGB LED Flexible 8x8 Pixel Panel Strip Matrix Screen WS2812 Module Individually Addressable IC DC5V

SKU: HMJ814 Category: Displays
KSH 600.00
Out of Stock

Product Description

WS2812B 8x8 RGB LED Matrix Panel

Individually Addressable IC LED Screen Module

This WS2812B LED matrix panel features 64 individually addressable RGB LEDs in an 8x8 pixel arrangement. The flexible strip design and DC5V operation enable vibrant color displays for creative projects.

Individually Controllable - Each LED shows unique color
Compact Matrix - 8x8 pixels in flexible panel
Use dedicated 5V 2A power supply for full brightness
Add capacitor 1000µF near power input for stability
Do not exceed 5.5V input voltage

Technical Specifications

ParameterValue
LED TypeWS2812B
Configuration8x8 Matrix
Total LEDs64 pixels
Input VoltageDC 5V
Color Depth24-bit RGB
Data Protocol1-Wire
Refresh Rate400kHz
Viewing Angle180 degrees

= Key Features =

PixelLevel Control Each LED individually addressable

Flexible Substrate - Mounts on curved surfaces

Cascadeable Design - Combine multiple panels

High Brightness - Visible in daylight

Fast Refresh - No flicker in video

= Applications =

  1. Animated message displays
  2. Gaming LED matrices
  3. Ambient lighting effects
  4. Wearable LED art
  5. Clock and timer displays
  6. Interactive light installations
Perfect for Animations - Smooth color transitions
DIY Friendly - Easy Arduino library support

√ Flexible PCB for mounting

√ Pre-soldered connector pins

√ Individual LED brightness control

Connection Guide

Three-wire interface:

  • VCC: 5V power input
  • GND: Ground connection
  • DIN: Data input signal

Power requirements:

  • Each LED at full brightness: 50mA
  • 64 LEDs total: 3.2A max
  • Recommend 5V 2A supply for typical use
Connect 1000µF capacitor across VCC and GND
Use resistor 470Ω on DIN line
Provide adequate power for all LEDs
Never connect data before power

Programming and Control

Works with common libraries:

  • Arduino: Adafruit NeoPixel
  • ESP8266/ESP32: NeoPixelBus
  • FastLED library for advanced effects

Control methods:

  • Set color for each pixel using RGB values
  • Display text using font libraries
  • Create scrolling animations

Easy Integration - Single data pin control

Wide Compatibility - All major boards supported

24-bit color depth for vivid effects
Over 1000 library examples available

√ Compatible with Arduino IDE

√ Includes header for easy connection

√ Matrix orientation marked on PCB

Daisy-Chaining Instructions

To connect multiple panels:

  • DIN from first panel to microcontroller
  • DOUT from first to DIN of second
  • Connect all VCC and GND in parallel
  • Update total pixel count in software
Keep data wires short to avoid signal issues
Add power injection every 2-3 panels
Do not exceed total current capacity
Account for power in software timing

Power Management

Power consumption at 5V:

  • Idle: 1mA (all LEDs off)
  • Single LED white: 50mA
  • All white at max: 3.2A
  • Rainbow animation: 2A typical

Efficient Design - Only lit LEDs consume power

Bright Color Display - Great for signage and art

√ Ready for immediate programming

√ Includes matrix mounting holes

√ Works with all major libraries