Toggle Switch SS12D00 DIP Slide Switch 3Pins SS12D00G3 The Power Switch Hand Shank 3MM – KSH 30 at HIMASTORES Mombasa – best electronics in Kenya
Home / Switches / Toggle Switch SS12D00 DIP Slide Switch 3Pins SS12D00G3 The Power Switch Hand Shank 3MM

Toggle Switch SS12D00 DIP Slide Switch 3Pins SS12D00G3 The Power Switch Hand Shank 3MM

SKU: HMJ670 Category: Switches
KSH 30.00
In Stock

Product Description

SS-12D00G3 DIP Slide Switch Toggle Switch

3-Pin 3MM Shank Power Switch for PCB and Electronics Projects

The SS12D00G3 is a standard 3pin DIP slide switch used for simple power switching in electronic projects. Its compact design and 3mm handle make it suitable for control panels and PCB mounting.

3Pin Configuration with Center Common Supports simple ON-OFF toggling
Compact 3mm Hand Shank - Easy to grip for manual operation
Maximum voltage rating: AC/DC 50V
Maximum current rating: 0.3A
Use for DIY electronics, Arduino projects, and control circuits

Technical Specifications

ParameterValue
ModelSS-12D00G3
Terminals3 Pins
Shank Length3mm
Contact TypeSingle Pole Double Throw (SPDT)
Contact Resistance≤ 30mΩ
Insulation Resistance≥ 100MΩ
Operating Temperature-25°C to +85°C

= Pin Configuration =

The switch typically follows this pinout:

  • Pin 1: Common (center)
  • Pin 2: Normally Open (NO)
  • Pin 3: Normally Closed (NC)
Connect the common pin to the circuit input, and use the NO/NC pins for switching
Use a multimeter in continuity mode to verify the pinout before soldering

Key Features

+Compact DIP Form Factor - Saves PCB space

+Easy Manual Operation - Slide design with a small handle

+Low Contact Resistance - Ensures minimal power loss

+Widely Available - Common part for hobbyist and professional use

= Applications =

  1. DIY electronics and Arduino projects
  2. Control panels and instrument interfaces
  3. Consumer electronics and handheld devices
  4. Simple power or mode selection switching
Versatile and Reliable - A standard switch for various electronics projects
Easy to Use Throughhole design for quick PCB mounting

√ 3mm handle for easy operation

√ DIP package compatible with standard breadboards

√ Compact and durable construction

Troubleshooting

Switch not working:

  • Check for proper soldering on all three pins
  • Test continuity with a multimeter
  • Verify the switch is in the correct position

No circuit closure:

  • Use the NC and NO pins to determine the switch's current state
  • Ensure the switch is fully toggled