PCB Terminal Block Connector Pitch 5.0mm KF301 Straight Pin 2PIN Screw Blocks – KSH 40 at HIMASTORES Mombasa – best electronics in Kenya
Home / Connectors / PCB Terminal Block Connector Pitch 5.0mm KF301 Straight Pin 2PIN Screw Blocks

PCB Terminal Block Connector Pitch 5.0mm KF301 Straight Pin 2PIN Screw Blocks

SKU: HMJ1085 Category: Connectors
KSH 40.00
In Stock

Product Description

PCB Terminal Block Connector Pitch 5.0mm KF301 Straight Pin 2PIN Screw Blocks

Dependable 2-Pin Screw Terminal Block for Simple, Secure Connections

The KF301 is a 5.0mm pitch straight pin terminal block connector with 2 pins, offering the simplest and most compact solution for reliable wiretoPCB connections. This 2pin screw block delivers secure, vibrationproof terminations for basic power, signal, or control wiring applications.

Supports wire gauges from 28AWG to 16AWG
Rated for 15A current and 300V voltage per pin
Pitch 5.0mm - standard for easy PCB layout
Tighten screws to 0.5 Nm maximum torque only overtightening may crack the housing

Technical Specifications

ParameterValue
Pitch5.0mm
Number of Pins2
OrientationStraight (Vertical)
Wire Gauge Range28-16 AWG
Rated Current15A
Rated Voltage300V
Contact MaterialTin-plated Brass
Housing MaterialPA66 (UL94V-0 Flame Retardant)
Operating Temperature-40°C to +105°C
Stripping Length5-6mm

= Key Features =

UltraCompact 2Pin Design Minimum footprint for spaceconstrained PCBs

Screw Clamp Termination Provides gastight, vibration-proof connections

Tinplated Brass Contacts Low contact resistance with excellent oxidation resistance

PA66 Housing High thermal stability and selfextinguishing UL94V-0 rated

5.0mm Standard Pitch Industrystandard spacing for universal compatibility

Straight Pin Orientation Allows topentry wire termination

= Applications =

  • DC power input connections
  • Battery terminals
  • Speaker and audio outputs
  • Relay contact wiring
  • Sensor power and signal lines
  • LED driver connections
  • Test and measurement equipment
  • Prototyping boards
Smallest Form Factor 2pin design perfect for minimalist PCB layouts
High Current Capacity - 15A rating despite compact size
ToolFree Reusability wires can be disconnected and reconnected easily

√ Ready to use - no soldering required

√ Reusable and serviceable - replace wires anytime

√ RoHS compliant - environmentally friendly materials

Package Includes

  1. 1x KF301 2-Pin Terminal Block (Straight, 5.0mm pitch)
  2. 2x M2.5 Screws (pre-installed)
Use stranded wire with ferrules for the most reliable connection
For high-current applications, ensure wire gauge is 18 AWG or thicker
Strip exactly 56mm of insulation too little reduces contact, too much risks shorts
For daisy-chaining power to multiple boards, use jumper wires between blocks
Pair with crimp ferrules for stranded wire to prevent strand fraying

Avoid using with wire gauges smaller than 28AWG as they may not clamp securely

Avoid partial insertion of stripped wire ensure full insertion before tightening

Avoid mixing solid and stranded wire in the same block use same type for both pins