LM358N DIP8 LM358P DIP LM358 DIP-8 new and original IC Chipset – KSH 150 at HIMASTORES Mombasa – best electronics in Kenya

LM358N DIP8 LM358P DIP LM358 DIP-8 new and original IC Chipset

SKU: HMJ660 Category: Intergrated circuits
KSH 150.00
In Stock

Product Description

LM358N / LM358P Dual Operational Amplifier IC DIP-8

New & Original GeneralPurpose OpAmp Chipset

The LM358 series is a versatile, lowpower dual operational amplifier IC designed for a wide range of analog applications. Available in both LM358N and LM358P variants, this DIP8 package IC integrates two independent, high-gain amplifiers with internal frequency compensation, making it an essential component for audio projects, sensor signal conditioning, and control systems.

Dual amplifiers in a single DIP-8 package
Works with single (3-30V) or dual (±1.5V to ±15V) power supplies
For 0°C to 70°C operating temperature range

Technical Specifications

ParameterValue
IC TypeDual Operational Amplifier
PackageDIP8 (Dual Inline Package)
Supply Voltage (Single)3V - 32V
Supply Voltage (Dual)±1.5V to ±16V
Supply Current~1mA
Bandwidth700kHz - 1.1MHz
Slew Rate0.3V/µs - 0.6V/µs
Input Offset Voltage2-3mV
Input Bias Current20-45nA
Operating Temperature0°C to 70°C
Mounting TypeThrough-hole

= Key Features =

Low Power Ideal for batterypowered devices

Wide Supply Range - Single or dual power supply operation

Dual Amplifiers - Two amplifiers in one compact package

Internal Compensation - No external compensation required

ThroughHole Easy soldering and breadboard use

High Gain - Supports signal amplification and filtering

Versatile Standard 8pin DIP for prototyping

New & Original - Authentic chipsets ensure reliability

= Applications =

  • Audio preamplifiers
  • Sensor signal conditioning
  • Active filters
  • Voltage followers
  • Current sensing circuits
  • Battery-powered projects
  • Control systems
  • Instrumentation and measurement
  • Oscillators
  • Comparators
  • General-purpose amplification

Key Differences: LM358N vs LM358P

FeatureLM358NLM358P
Slew Rate0.6V/µs0.3V/µs
Input Bias Current45nA20nA
Temperature Range0°C to 70°C0°C to 70°C

> Both are functionally identical for most projects with minor electrical characteristic differences


Pin Configuration (DIP-8)

PinFunction
1Output 1
2Inverting Input 1
3Non-Inverting Input 1
4VCC- / GND
5Non-Inverting Input 2
6Inverting Input 2
7Output 2
8VCC+

> Standard 8-pin DIP configuration

Pin 4 connects to GND (single supply) or negative voltage (dual supply)
Pin 8 connects to positive supply voltage

Why Choose LM358N/LM358P?

Industrystandard dual opamp IC
Low power for portable applications
Available in both N and P variants
Throughhole DIP8 for easy use
New and original chipsets guaranteed
Cost-effective for everyday projects

√ Works with Arduino, Raspberry Pi, and other MCUs

√ Compatible with 3V and 5V systems

√ Stable over full temperature range

√ Reliable for hundreds of uses

√ Proven design for decades


Safety Precautions

Do not exceed 32V supply voltage
Observe polarity when connecting power
Protect from ESD during handling
Do not short outputs to ground
Use decoupling capacitors near supply pins
Use 0.1µF capacitors on VCC and GND for stability
Use proper heat sinking for high-power applications

The LM358N/LM358P dual operational amplifier IC delivers reliable, lowpower performance in a standard DIP8 package. New and original chipsets ensure quality for your audio, sensor, and general-purpose projects.

LM358N LM358P LM358 OPERATIONALAMPLIFIER OPAMP DIP8 CHIPSET IC ARDUINO SIGNALPROCESSING AUDIO SENSORS ELECTRONICS DIY New Best Seller LM358