22picofarads Multilayer Ceramic Capacitor – KSH 10 at HIMASTORES Mombasa – best electronics in Kenya
Home / Capacitors and resistors / 22picofarads Multilayer Ceramic Capacitor

22picofarads Multilayer Ceramic Capacitor

SKU: HMJ1026 Category: Capacitors and resistors
KSH 10.00
In Stock

Product Description

22pF Multilayer Ceramic Capacitor (MLCC)

High-Frequency Capacitor for Oscillator, RF, and Timing Applications

The 22pF Multilayer Ceramic Capacitor is a precision smallvalue capacitor ideal for crystal oscillator circuits, RF matching, highfrequency filtering, and timing applications. Available in both surfacemount and throughhole packages, this capacitor provides excellent stability with very low ESR for high-performance applications.

Capacitance value: 22pF (marked as "22" on the component)
Commonly used for crystal oscillators, RF circuits, high-pass filters, and antenna matching
Do not exceed the rated voltage voltage derating is recommended for reliable longterm operation
For high-frequency and oscillator circuits, use NP0/C0G dielectric for maximum stability

Common Specifications

The 22pF MLCC is available in multiple package sizes and voltage ratings to suit different applications:

ParameterCommon Variants
Capacitance22pF (±1 to ±10%)
Voltage Rating25V, 50V, 100V, 200V DC
DielectricNP0/C0G (high precision), X7R (general-purpose)
Temperature Range-55°C to +125°C
Package (SMD)0201, 0402, 0603, 0805, 1206
Package (Through-Hole)Radial

= Key Features =

HighFrequency Performance Very low ESR/ESL for excellent high-frequency response

Wide Voltage Options - Available from 25V to 200V DC for various applications

Precision Dielectric Options - NP0/C0G offers ±30ppm/°C temperature stability and ±1 to ±5% tolerance

Compact SMD Packages Available in 0201 to 1206 sizes for highdensity PCB designs

NonPolarized Easy assembly with no polarity concerns

HighQ Factor Suitable for resonant and tuned circuits

= Applications =

  • Crystal and ceramic resonator oscillator circuits
  • RF matching and tuning circuits
  • Highpass and lowpass filters
  • Antenna matching networks
  • PLL loop filters
  • Timing and delay circuits
  • EMI/RFI suppression at high frequencies
  • Signal coupling in high-speed digital circuits
Standard Value for Crystal Oscillators 22pF is the most common loading value for crystals (816MHz range)
NP0/C0G Option Offers ultrastable capacitance over temperature and voltage

√ Ready to use - no polarity for easy assembly

√ Excellent high-frequency characteristics for demanding applications

√ Available in precision ±1% tolerance for critical circuits

Package Includes

Varies by seller - typically available in:

  1. Tape and reel (SMD) - quantities from 100 to 10,000+ pieces
  2. Bulk packs (throughhole) quantities from 10 to 1,000+ pieces
  3. Cut tape / loose pieces for prototyping
For crystal oscillator circuits with 8-16MHz crystals, 22pF is the standard recommended loading value
Use NP0/C0G dielectric for stable frequency operation over temperature changes
For RF matching applications, use ±1% tolerance for accurate impedance matching
This capacitor is ideal for crystal loading with 12pF to 30pF range - check your crystal datasheet
For high-precision timing circuits, ±1% NP0/C0G parts are the recommended choice
For high-frequency applications, use minimum lead length to avoid parasitic inductance

Avoid using X7R dielectric in precision timing or VCO circuits capacitance varies with temperature and DC bias

Avoid exceeding rated voltage for 50V rated parts, recommended operating voltage is typically ≤40V

Avoid placing capacitors far from ICs in highfrequency circuits - trace inductance degrades performance